6.12 Serial Parameter Settings
This section allows to you configure serial interface related parameters.
Configuration options are as below.
  • Serial 0 - Set baud rate and communication protocol for a console.
  • Serial 1: Set baud rate and protocol for Telemetry 1.
  • Serial 2: Set baud rate and protocol for Telemetry 2.
  • Serial 3: Set baud rate and protocol for GPS.
  • Serial 4: Set baud rate and protocol for serial 4.
  • Serial 5: Set baud rate and protocol for serial 5.
  • Serial 6: Set baud rate and protocol for serial 6.
  • Baud rate : Set the speed of transfer of bits from the serial port.
  • Protocol : Set the protocol of transfer of data.
RPA Configuration -Serial Param
RPA Configuration -Serial Param
  • Select the proper values of baud rate from the dropdown menu.
  • Select the proper communication protocol from the dropdown menu provided.
  • After selecting all the parameters update the data by clicking on "Update" button.
  • All the parameters are sent to the device to store and respond accordingly.
Copy link