6.2 Selection of Airframes
The airframe is the chassis that holds all the components, and payloads on it. Its size and capacity are very much concerned with the construction of drones. As discussed in1st-course module the selection of airframes should be proper to carry the weight of all the components of a drone. Selection of the proper airframe is necessary as it is associated with the firmware of the system.
RPA Configuration -Airframe
The Airframe setting can be done to choose required airframe so that flight controller software can understand and operate accordingly. This is very important setting and must be ensured before flight is taken. It has two types of settings.
a) Frame Class : All the standard classes of airframe supported by Ardupilot and PX4 firmware are displayed here. You need to select on of them and reboot the drone.
b) Frame Type : All the standard frame types of airframe supported by Ardupilot and PX4 firmware are displayed here. You need to select one of them as per drone physical specifications.
Copy link