🌏
AeroGCS KEA User Manual
  • AeroGCS KEA 2.3
  • 1 Getting Started
  • 2 Dashboard
  • 3 Home Menu
  • 4 Project
    • 4.1 Create Project
    • 4.2 Setting Location
    • 4.3 Flight Type
    • 4.4 Add a New Plan
    • 4.5 Use of an Existing Plan
    • 4.6 Edit the Plan
    • 4.7 Save Project
    • 4.8 Delete the Project
  • 5 Connecting a Drone
  • 6 RPA Configuration
    • 6.1 Selection of Airframes
    • 6.2 Calibration of Sensors
    • 6.3 Safety Parameters
    • 6.4 Assigning Flight Modes
    • 6.5 RC Calibration
    • 6.6 Motor and ESC Calibration
    • 6.7 Managing a Battery (Power Settings)
    • 6.8 Serial Parameter Settings
    • 6.9 Camera and Camera Config
    • 6.10 Joystick Settings
    • 6.11 Spraying Configuration
    • 6.12 Reset Parameters
    • 6.13 Advanced Settings
    • 6.14 Firmware Upgrade
      • 6.14.1 Automatic Firmware Upgrade
      • 6.14.2 Manual Firmware Upgrade
  • 7 Flight Types
    • 7.1 Waypoint Planning
    • 7.2 Survey Planning
    • 7.3 KML Survey
    • 7.4 Plan for Spraying
    • 7.5 Vertical Flight Plan
    • 7.6 Import KML
    • 7.7 Corridor Plan
    • 7.8 KML Spraying
    • 7.9 Circular Plan
    • 7.10 Read from Device
    • 7.11 Adding Rally Points
    • 7.12 Providing Fence
    • 7.13 Flight Fly View
  • 8 First Flight
  • 9 Flight Logs
  • 10 Team Access Management
  • 11 VTOL Support
    • 11.1 Survey Plan for VTOL
    • 11.2 VTOL Flight Modes
  • 12 Special Features
  • 13 Vehicle Type
  • 14. Hardware Supported by AeroGCS
  • AeroGCS KEA Enterprise
    • 1. Dashboard
    • 2. Creating a Project
    • 3. Managing a Team
    • 4. Drone Lease
    • 5. GREEN-E
      • 5.1 Revenue
      • 5.2 Crops
      • 5.3 Customers
      • 5.4 Acreage
      • 5.5 Seasons2
      • 5.6 Growth Statistics
      • 5.7 Revenue Trend
    • 6. Project Sync
    • 7. Live Tracking of Flight
    • 8. Settings
    • 9. LiveStream
    • 10. Incident Report
Powered by GitBook
On this page

Was this helpful?

  1. 6 RPA Configuration
  2. 6.14 Firmware Upgrade

6.14.1 Automatic Firmware Upgrade

Previous6.14 Firmware UpgradeNext6.14.2 Manual Firmware Upgrade

Last updated 2 years ago

Was this helpful?

In automatic firmware user can select the type of firmware according to the requirement and can flash the type of firmware of specific board type.

Follow the instructions that popped up on the screen to proceed.

Firmware setup may require more time. Wait to complete the procedure of firmware setup.

Note: Do not turn off the system during the firmware upgrade process.

For more details watch the video.

Secure Firmware
Firmware Upgrade
Firmware Setup
Firmware Upgrade
Firmware Upgrade